Laminating
ASTRALAM OLDI (cold laminating film)
0.08mm PVC pressure sensitive laminating film specially manufactured for protecting materials printed with dye, pigment and solvent inks. Coated with a permanent solvent based PSA adhesive which is laminated to a moisture stable release liner. The film is non-yellowing.
The following four grades are available from DEP
Suitable for indoor and limited outdoor use:
GLOSS - a clear high-gloss surface laminating film designed for protection of print surfaces and enhancing all print features. Ideal for large format prints and posters, photographs etc.
SATIN - a semi-gloss clear laminating film with a smooth low sheen surface. Recommended for optimum resolution of images; ideal for pop-ups, large format prints, posters etc.
MATT - a clear flat non-reflective laminating film. It reduces reflection and glare without affecting the quality of any high-resolution images. Ideal for large format exhibition displays.
Recommended for indoor use only:
SANDTEX - a heavy textured, clear non-reflective surface. This material is durable and scuff resistant. Ideally suited for large format displays.
The above products are available in two standard sizes - 100 Metres x 1040mm and 100 Metres x 1300mm. Bespoke sizes are available upon request.
ASTRAMOUNT LDI
LDI is a high quality 12 micron polyester film is coated on both sides with a permanent pressure-sensitive non-yellowing adhesive. It is protected by a moisture-stable release liner for excellent lay-flat characteristics. Recommended for indoor applications, this self-wound general purpose mount film is compatible with most commonly used media and substrates.
Recommended for posters, photographs and large format prints.
Astramount LDI is available in a variety of standard sizes, with bespoke widths available on request.
DRY MOUNT TISSUE - traditional
Pricelist for Dry Mount Tissue
The heat activated Dry Mount Tissue manufactured by DEP is a double sided coated high quality mount tissue. Its solvent based polymer adhesive allows it to be heat activated onto a breathable open structure paper or board.
Ideal for mounting photographs, posters or paper prints onto most flat substrates including MDF board.
Available in both rolls and cut sheets.
- Processing temperature: 85-100 degrees
- Dwell time: 60 - 90 seconds
- Adhesive bond: Permanent
- PH: Neutral
- Overall thickness: 75 Micron
